pl2210系列二极管泵浦皮秒Nd：YAG激光器产品简介:短脉宽、高能量，高达2 kHz的重复率和优良的脉冲稳定性进行pl2210系列二极管泵浦皮秒激光器的许多应用的首选，如材料加工、激光光谱学、光学参量发生器泵和其他任务。产品特点：高脉冲能量二极管泵浦固体设计空气冷却,不需要外部供水交钥匙工程维护成本低可选条纹相机触发脉冲与< 10的均方根抖动遥控板通过USB接口与PC机提供的控制LabVIEW? drivers可选的温度稳定性，第二，第三，第四谐波发生器产品应用：时间分辨荧光，泵浦-探测光谱OPG/OPA/OPO泵浦其他光谱和非线性光学中的应用激光遥感规格：型号PL2210PL2210APL2210BPL2210B-TRPL2210C输出功率at 1064 nm0.4 mJ0.9 mJ2.5 mJ2.5 mJ at 1 kHz 5 W at 88 MHz2.5 mJ / 5 mJat 532 nm2)0.2 mJ0.45 mJ1.3 mJ-1.3 mJ / 2.5 mJat 355 nm3)0.11 mJ0.3 mJ0.8 mJ-0.8 mJ / 1.3 mJat 266 nm4)0.05 mJ0.15 mJ0.5 mJ-0.5 mJ / 0.8 mJ脉冲能量稳定(Std. Dev)5)at 1064 nm0.5 % at 532 nm0.8 % #colspan#at 355 nm1 % at 266 nm2.5 % 脉冲持续时间(FWHM)6)252 ps252 ps 808 ps 10010 ps252 ps / 808 ps脉宽稳定性7)1 ps1 ps3 ps3 ps1 ps / 3 ps脉冲重复率8)1 or 2 kHz1 kHz1 kHz / 1 MHz1 kHz触发模式internal/external典型的同步输出脉冲延迟9) 10)-500...50 ns 同步输出脉冲抖动(Std. Dev)<0.1 ns rms空间模式11)TEM00光束发散角12)<1.6 mrad 光斑直径13)~3 mm 光束指向稳定性14)<30 μrad 脉冲对比度200:1极化linear, 100:1物理特性Laser head size (W x L x H), mm15)455 x 1035 x 242455x1235x242 mm电源尺寸(W x L x H), mm365 x392 x 290475 x 460 x 290365x285x360 mm操作要求冷却水没要求，空气冷却相对湿度10-80 % (non condensing)环境温度22 2 °C 电源要求100-240 VAC, single phase, 50/60 Hz功率消耗16)<0.5 kW<1 kW<1 kW<2 kW<1.5 kW1) Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 1064 nm. 2) For PL2210x-SH and PL22210x-SH/FH options. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options. 3) For PL2210x-TH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options. 4) For PL2210x-SH/FH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options. 5) Averaged from 300 pulses at 1 kHz pulse repetition rate. 6) Optional 808 ps duration. 7) Measured over 1 hour period when ambient temperature variation is less than 2 °C. 8) Should be specified when ordering. Inquire for custom pulse repetition rates. 9) In respect to optical pulse. <10 ps rms jitter is provided with PRETRIG option. 10) SYNC OUT lead or delay can be adjusted with 0.25 ns steps in specified range. 11) Gaussian fit 90%. 12) Full angle measured at the 1/e2 point at 1064 nm . 13) Beam diameter is measured at 1064 nm at the 1/e2 point. 14) Rms value measured from 300 shots. 15) 455×1235×250 mm (W×L×H) laser head size might be required for some optional configurations. 16) At 1 kHz pulse repetition rate.OptionsOption PRETRIG provides low jitter pulse for streak camera triggering with lead/delay in -150...150 μs range and <10 ps rms jitter.Option P80 provides 808 ps output pulse duration. Main specifications:型号PL2210PL2210A脉冲能量1)0.7 mJ1.2 mJ脉冲持续时间(FWHM)<80 ps*At 1064 nmOption PC allows reduction of the pulse repetition rate of the PL2210 series laser by integer numbers. Single shot mode is also possible. In addition, the –PC option reduces the low-intensity quasi-CW background that is present at laser output at 1064 nm wavelength. Please note that the output of fundamental wavelength and harmonics will be reduced by approx. 20% with installation of the –PC option.光束轮廓图1 典型的近pl2210系列激光束剖面外形图：