Physical
|
Dimensions: |
182 mm x 110 mm x 47 mm |
Weight: |
1.18 kg (without power supply) |
Detector |
Detector:
|
Hamamatsu S7031-1006
|
Detector range: |
200-1100 nm |
Pixels:
|
1024 x 58 (1044 x 64 total pixels)
|
Pixel size:
|
24.576 μm2
|
Pixel well depth:
|
1000 Ke-
|
Sensitivity: |
~0.065 counts / e- |
Quantum efficiency: |
90% peak; 65% at 250 nm |
Optical Bench |
Design: |
f/4, Symmetrical crossed Czerny-Turner |
Focal length: |
101.6 mm input and output |
Entrance aperture: |
200 �m wide slit |
Grating: |
HC1-QE |
OFLV filter: |
OFLV-QE-350 (350-1100 nm) |
Collimating and focusing mirrors: |
Standard only |
UV enhanced window: |
No |
Fiber optic connector: |
SMA 905 to 0.22 numerical aperture single-strand optical fiber |
Spectroscopic |
Wavelength range: |
350-1100 nm (grating dependent) |
Optical resolution: |
~6 nm FWHM |
Signal-to-noise ratio: |
1000:1 (at full signal) |
A/D resolution: |
16 bit |
Dark noise: |
3 RMS counts |
Dynamic range: |
7.5 x 109 (system), 25000:1 for a single acquisition |
Integration time: |
8 ms to 15 minutes |
Stray light: |
<0.08% at 600 nm; 0.4% at 435 nm |
Corrected linearity: |
>99.8% |
Electronics |
Power consumption: |
500 mA @ 5 VDC (no TE cooling); 3.5 A @ 5 VDC (with TE cooling) |
Data transfer speed: |
Full scans to memory every 7 ms with USB 2.0 port, 18 ms with USB1.1 port, 300 ms with serial port |
Inputs/Outputs: |
10 onboard digital user-programmable GPIOs (general purpose inputs/outputs) |
Analog channels: |
No |
Auto nulling: |
Yes |
Breakout box compatibility: |
Yes |
Trigger modes: |
4 modes |
Strobe functions: |
No |
Gated delay feature: |
Yes |
Connector: |
30-pin connector |
Power-up time: |
<5 seconds |
Dark current:
|
4000 e-/pixel/sec @ 25 �C; 200 e-/pixel/sec @ 0 �C
|
Computer |
Operating systems: |
Windows 98/Me/2000/XP, Mac OS X and Linux with USB port; Any 32-bit Windows OS with serial port |
Computer interfaces: |
USB 2.0 @ 480 Mbps; RS-232 (2-wire) @ 115.2 K baud |
Peripheral interfaces: |
SPI (3-wire); I2C inter-integrated circuit |
Temperature and Thermoelectric (TE) Cooling |
Temperature limits: |
0 �C to 50.0 �C; no condensation |
Set point: |
Software controlled; lowest set point is 40 �C below ambient |
Stability |
+/-0.1 �C of set temperature in <2 minutes |