YL-3315T1 磨耗试验机 Abrasion tester 特点：耐磨耗试验机利用特定型号的砂轮, 在一定的荷重下, 对试片进行磨耗, 并以试片在经过固定的圈数磨耗后,所损失的重量来评估试片的耐磨耗特性, 如为耐磨材料以目测表面刮伤之状况来判定。适用于皮革、布类、涂料、纸、地砖、合板、玻璃、天然橡胶等耐磨试验。 YL-3315T1 TABER Abrasion Tester is designed according to JIS, ASTM and relative standards. The main function is using specified grinding wheel with specified Load to rub the surface of specimen, and then evaluate the abrasion condition. The abrasion property could be indicated by measure the loss of weight, volume and thickness. This tester is suitable used for abrasion test to leather, fabric, paint, paper, floor brick, plywood, glass, natural rubber and so on. ? 规格： 磨耗轮? Grinding Wheel 直径2英吋，厚度1/2英吋 Diameter 2 inches, Width 1/2 inches 左右磨耗轮中心间距 Betweencenters of Left & Right Grinding Wheels 63.5mm 磨耗轮与试片盘中心的间距 Betweencenters of Specimen Tray and Grinding Wheel 38mm 试验盘转速 Test Tray Rotating Speed 采用步进马达，1-100RPM可设定 (出厂设定值60RPM) Use stepper motor, 1-100RPM, can set (default set value 60RPM) 荷重? Loading 250g、750g、1000g(空重250g，附不锈钢砝码250g、750g调整) 250g, 750g, 1000g (bare weight 250g, attached stainless steel weights 250g, 750g, adjustable) 计数器 Counter 电子液晶显示8位数，自动停机 Electron liquid crystal display 8 digits, auto-stop. 试片尺寸 Specimen Size φ110mm，中心孔φ7.5mm φ110mm, center hole φ7.5mm 厚度 Thickness 1～6mm，软性、硬性材料皆可测试 1~6mm, soft and hard materials can be test 试片夹持座 Specimen Clamping Block 可轻松拆卸，做为更换湿磨耗测试、超厚试片等特殊测试，专用夹座配件使用(选购项目) Easy remove, as replacement wet abrasion test, ultra-thick specimen and other special test, used with specialized clampers (optional) 配件 Accessories 试片切刀1支、板手 1支、 砂纸10张、试片夹持框1个? 吸尘机 1台（吸尘机自配） 1pc of specimen slicer, 1pc of wrench, 10pcs of sand papers, 1pc of specimen clamping frame, 1pc of vacuum cleaner (self-made) 体积 Machine Dimension 55×38×47cm 重量 Machine Weight 30kg? 电源 Power 1∮,AC220V, 10 A